Victory BX42S Скачать руководство пользователя

Страница: 12 / 51

Operator’s Manual Victory BX42S

- Page 12 of 51 -

Version 2.0

3.2

Generally Applicable Safety Rules

This list contains general safety measures which must be complied with for personal safety
reasons.

◼

Make sure children and animals cannot come into the machine's vicinity.

◼

Only persons who have read and understood the operating instructions might be in the
machine's vicinity.

◼

Unauthorized persons may not perform acts if the machine is in use.

◼

Never work alone; always ensure that at least one person is nearby.

◼

Do not remove the brought warning stickers or markings.

◼

Always clean the machine properly and keep the workplace free of dirt and obstacles.

◼

Always ensure sufficient ambient lighting.

3.3

Personal Protective Equipment

While handling, assembling and maintaining the woodchipper, adhering to all recommended safety
instructions and ensuring that the correct Personal Protective Equipment (PPE) is used.

Always wear:

◼

Suitable ear protection.

◼

Safety helmet for head protection and prevention from falling objects.

◼

Safety gloves; for hand protection and prevention of cuts from sharp edges.

◼

Steel-tipped safety boots; for foot protection from falling objects.

◼

Wrap-around safety glasses for eye protection and prevent damage caused by shooting
particles.

◼

Safety vest for recognizable presence, visibility and safety.

◼

Any other Personal Protection Equipment that might be required, specified, or dictated by the
working environment.

◼

Your Company can prescribe additional (safety) instructions. This Manual does not describe
how to comply with this.

3.4

General Safety Rules for Machines

◼

Incorrect practice or lack of care can cause burns, wounds, mutilation, suffocation, bodily
injuries, or death.

◼

Ensure the work area around the equipment is smooth, clean and free from any obstacles.
Keep in mind that a dangerous situation can always arise.

◼

Always wear personal protective equipment.

◼

Long hair is not allowed.

◼

Never wear loose or torn clothing. Permanently remove jewelry.

Содержание BX42S




















































Результаты поиска

Содержание BX42S

Отзывы:

Похожие инструкции для BX42S

Бренды по названию

Популярные бренды

Victory BX42S, Руководство оператора

Результаты поиска

Содержание BX42S

Отзывы:

Похожие инструкции для BX42S

Бренды по названию

Популярные бренды