Operator’s Manual Victory BX42S
- Page 24 of 51 -
Version 2.0
◼
Locate and remove the retaining bolt
that holds the flywheel chamber
closed. Use the 18 mm wrench.
◼
Open the flywheel chamber.
◼
Rotate the flywheel by hand to ensure
no obstructions are in the flywheel
chamber.
The knives are
VERY
sharp.
◼
Visually inspect for any obstructions.
◼
Close the cover and reinstall the
retaining bolt.
W A R N I N G !
•
Wear heavy leather gloves and use extreme caution.
•
Never operate the woodchipper with the flywheel chamber open.
4.1.1
Determine the PTO Shaft Length, shorten if necessary
To determine the proper length of the driveline; Follow this procedure:
◼
Attach the woodchipper to the tractor but do not attach the PTO shaft.
◼
Raise the machine until the input shaft is level and aligned with the tractor PTO shaft.
◼
Measure the dimension (A) between the locking grooves on the tractor PTO shaft and the
implement input shaft.
◼
If the PTO shaft is too long then measure the dimension (B) between both locking pins.
◼
Calculate distance C and do the folowing to shorten the PTO shaft:
◼
Use a hacksaw to cut distance (C)
from both ends.
◼
Cut C from both the plastic cover
tubes and from the metal cores.
◼
Use a file to remove all burrs from
the cut edges.
◼
Assemble the two ends; use grease.
◼
Make sure the shaft can telescope
freely before installing.