Victory BX42S Скачать руководство пользователя

Страница: 8 / 51

Operator’s Manual Victory BX42S

- Page 8 of 51 -

Version 2.0

INTRODUCTION

2.1

About This Manual

This Operator

’

s manual belongs to the owner of the Victory BX42S Woodchipper.

Read this Operator

’s Manual before operating the BX42S

•

Pay special attention to safety precautions presented in this manual, as
they prevent accidents causing machine damage, human injury, or
death.

•

This machine can be dangerous. Therefore, reading this manual
entirely before the operation is essential.

•

This manual describes characteristics unique to woodchipper BX42S.

•

In this manual, Safety is a priority. You will become aware of the
dangers and hazards of operating this machine by reading it.

2.2

Manual Update

Reason for raising the Operator

’

s manual to version 2.0:

◼

Editorial update according to CE Standard

◼

Graphics and layout improved.

2.3

Explanation Documentation

Chapter 3; 'Introduction' and Chapter 4, 'Safety' is essential for anyone working on the machine.

◼

For operators is essential:
- Chapter 5; Operation.

◼

For Service and Maintenance personnel is essential:
- Chapter 5; Operation.
- Chapter 6; Other activities.
- Chapter 7; Maintenance.

◼

For Product management is essential:
- Chapter 13; Specifications.

2.4

List of Abbreviations

◼

PTO:

Power Take Off.

◼

ASME:

American Society of Mechanical Engineers.

◼

PPE:

Personal Protective Equipment.

◼

CE:

Conformité Européene.

Содержание BX42S




















































Результаты поиска

Содержание BX42S

Отзывы:

Похожие инструкции для BX42S

Бренды по названию

Популярные бренды

Victory BX42S, Руководство оператора

Результаты поиска

Содержание BX42S

Отзывы:

Похожие инструкции для BX42S

Бренды по названию

Популярные бренды