Operator
’s Manual Victory BX42S
- Page 31 of 51 -
Version 2.0
5.6
Running-in the woodchipper
Although there are no operational restrictions on the Woodchipper when used for the first time, it
is recommended that you check the following mechanical items:
After operating for 1 hour:
1.
Torque all fasteners.
2.
Check the condition of flywheel bearings.
3.
Check the condition and clearance of the twig-breaker and the clearance between flywheel
knives and stationary counter knife. Adjust or replace as required.
4.
Check for entangled material. Remove all entangled material before resuming work.
5.
Lubricate all grease nipples.
After operating for 10 hours:
1.
Repeat steps 1 through 5 listed above.
2.
Go to the regular servicing and maintenance schedule defined in the Maintenance section.
