Vicon Surveyor MKII Series XX282-40-01, Руководство по конфигурации и эксплуатации

Страница: 15 / 25

12
From the OSD (On Screen Display) screen, the PTZ information
and image that displays on screen is configured.
Titles : When PTZ info is selected, the PTZ camera supports titles
for presets, scans and auto tours to display (in the PTZ Info/Image
group); select On, Off or Fade, where title will fade from screen;
the fade time is set under time info. The PTZ supports titles for the
camera in the Time & camera group; select On or Off.These titles
are set in their respective screens in PTZ. System info, such as
azimuth and compass, and the time and date can be set to display in
live view; select On or Off.
When Image is selected, a picture, for example a logo, can be
uploaded to display. Click Image and click Browse to upload a
picture. [Note: The picture must meet the requirements of: its
length, a multiple of 32; its width, a multiple of 4; 256 color (8 bit
depth); bmp format.] Use the Transparent slide to adjust the
transparency of the picture. Click the Clean white box to remove
the background of the picture.
X/Y-axis: set the title axis location. Both X-axis and Y-axis can be
any whole numbers from 0 to 99.
Font Size: set the font size to be displayed. The higher the value is,
the larger the font size is (1-5).
After all settings are finished, click
“ Save” button to display OSD
information on the video. To remove OSD display, set all
parameters to “OFF” and then click the button “Save”.
3.5.3 Motion Detection
Figure 3-28 Motion detection settings
Motion detection function is supported. Up to 4 motion zones can
be configured.
If the zone number is already set as a motion detection zone, a blue
line frame (the motion detection zone) will be displayed on the
screen when it is selected.
Setting method for motion detection area:
Note: The 4 zones can be set in a same scene. Presets must be set
for the motion detection areas to be configured.
Select the preset number and then check the Zone number. Click the
button “Draw” and then left-click on the screen and draw a blue
line frame. When the blue line box is drawn, click the button
“Save” to save the zone; the blue line will turn to green, indicating
the setting is finished.
The zone sensitivity can also be set in the interface using the slide
bar; moving the slide towards the plus sign heightens the sensitivity.
Unchecking the zone number removes the motion detection zone
display.
3.5.4 Saving Path
Figure 3-29 Saving path
The default photo saving path is: C:\VideoPlayerAX\Picture.
The default video saving path is: C:\VideoPlayerAX\Video.
The photo format and video format can be set here. The default
photo format is: .jpg (.bmp is also available); the default video
format is: .avi.
To change the saving path, click “Browse” to pop up the dialog box
for saving path selection.
Click “Save” when finished.
3.5.5 Audio Setting
Figure 3-30 Audio setting
Sample rate: fixed at 8K.
Format: fixed at G711-U.
Enable: select On or Off.
Click “Save” when finished.