Vicon Surveyor MKII Series XX282-40-01, Руководство по конфигурации и эксплуатации

Страница: 7 / 25

4
Figure 2-2
4. For the “Download unsigned ActiveX control” options, change the
“Disable” to “Enable” or “Prompt”. Click OK.
5. Select the “Privacy” option and deselect the checkbox of “Block
pop-ups”. Click Apply and OK.
Figure 2-3
Chapter III System Setting
This chapter will explain the system settings and the operation
methods that the Admin can perform for the dome.
3.1 Video View
After the dome is powered for about 60 seconds, open the IE browser
and then enter IP address. The user login dialog box will be displayed,
as shown below:
Figure 3-1 Login Interface
Please note that Surveyor MKII HD series dome camera defaults to
using DHCP.
If it is the first time running the software, users should use the default
admin username and password. The default User is “ADMIN”
(uppercase, case sensitive) (Password: 1234). Input the correct user
name and password and then press “OK” to login.
Note: It is recommended to modify the password of the admin user
to ensure the safety and security of the system.
When the login is successful, the system will enter the following
interface:
Figure 3-2 H.264 live view interface
Surveyor MKII HD series domes supports H.264/MJPEG
compression. After the login, users will enter the Live view interface
displaying the Primary stream at H.264 format.
Click the expand icon to open the “View” option on the navigation
bar; from Stream type, select secondary stream (H.264) or MJPEG
formats from the drop-down list to view that video. For the H.264
Primary stream and Secondary stream views, users can record, take