15
enable the state display function. Click Set mask.
Note: If the privacy mask zone is already set, the corresponding
privacy mask zone will be displayed on the screen.
Step 3: Click the “Confirm” button to set the center of the privacy
mask zone as per the dome control prompts.
Note:
The vertical angle cannot be larger than 7
0
°.
Step 4: Use the pan and tilt controls of the dome to set the size of the
privacy mask zone. And press “Apply” button to finish it.
Note:
The camera module supports 4 privacy mask zones.
3.6.7 RS485 setting
Figure 3-37 RS485 setting
Settings:
Address: 1~255.
Protocol: IPD (fixed).
Baud rate: 2400 bps, 4800 bps, 9600 bps.
Work mode: normal, energy-efficient.
Set the PTZ work mode to “normal” or “energy-efficient”. When the
dome is in static status, you can choose energy-efficient mode to
reduce the motor current to cut down the radiating and power
consumption.
Tilt angle: normal, far vision.
3.7 Schedules
Click Schedule on the left navigation bar to display the Schedules
interface shown below.
Figure 3-38 Time function
In Mode setting, the Act mode status and effective period of the
cameras can be defined.
Timed tour can also be set up.
Act mode: Close (No tour), Once (valid for that day), Everyday
(valid every day) and User-def (user defined).
Act time: When the Act mode is set to “User-def”, the Act time can
be selected. For example, if Monday is selected, then the act will be
performed every Monday.
Action: If Act mode is selected anything other than Close, the Act
number fields become active. Set up a start and end time for each of
six actions (time period is set up in 24 hour format (hour: minute)).
For Mode setting, the response Action includes the 6 modes
configured in the "Camera" setting interface; for Timed tour, the
response action can be selected from No.1~32 preset, No.1~4 Auto
tours or No.1~4 Scan options.
Click Set to save the schedules.
3.8 Alarm
Click “Alarm” on the left navigation bar to display the alarm setting
interface shown as below:
Содержание Surveyor MKII Series XX282-40-01
Страница 24: ...V1 0 1511...
Страница 25: ...VICON INDUSTRIES INC For office locations visit the website www vicon security com...
