10
IP address format: xxx.yyy.yyy.zzz/www.
Note: For xxx you can select from 1~233 except 127; for yyy you
can select 0~255; for zzz you can select 1~254 and for www you
can select 1~24.
Click the Save button after you add an IP address and the added IP
address will appear on the IP address list. If you tick the Enable IP
Filter check box, you can only access the IP addresses that have
been added. Prior to enabling IP Filter, you can ensure that there
are IP addresses to access and you can remember the addressable
IP.
On address list in the right side Operate column of the IP address
list, click the
icon to delete and the
icon to edit.
3.4 Camera Settings
Note:
The dome supports the editing of the camera parameters. In
the camera setting interface, users can set 6 groups (profiles) of
parameters, defining each group as a mode. Additionally, the set
mode can also be changed. In the Schedule Time Function interface,
users can call up the different modes and set them individually. Refer
to the section 3.7.
Click “Camera” tab to display the interface shown as below. The
configuration items include Zoom, Iris, Focus, White Balance,
Exposure, Day/Night, and Special function; a Restore default
settings button is provided to return all settings back to factory
defaults.
Figure 3-25 Camera settings
Zoom:
Set the zoom speed (Fast or Slow) and perform zoom in/out
operations.
Iris:
Set iris mode from the dropdown list of M/A (manual priority),
Auto, and Manual. Iris value and Iris average are settable when Auto
mode (M/A or Manual) is not selected.
Focus:
The following parameters can be set;
Mode:
M/A (manual priority), Auto and Manual.
Focus limit:
10cm, 30cm, 1m, and 3m.
Click Restore default settings to undo any settings and return the
camera to factory default settings
White Balance
Mode: Select Auto, Manual, Sodium, or Mercury. When the white
balance is set as “Manual”, the R-gain (red light AGC) and B-gain
(blue light AGC) can be set.
Exposure
Parameter settings are shown below:
Mode: Set exposure mode, Auto (low)/Auto (medium)/Auto
high)/Auto (D/N)/Shutter/Exposure.
Level: In Shutter mode, set the Level and select from
1/2s~1/30000s (16) levels adjustable
；
in Exposure mode, set iris
level and select from F3.2~F9.1 (4) levels adjustable.
Backlight: On, Off. When the BLC is turned on, the level of BLC
can be set.
DSS (Digital Slow Shutter): The digital slow shutter slows the
picture frame rate and enhances the camera’s sensitivity in poorly
lit environments. When Exposure mode is set to Auto mode, DSS
is settable in 1/60~1/2 (6) levels.
WDR mode: Off, WDR, AD WDR.
Image Stabilization (EIS): On, Off. When set to On, select
frequency.
Day/Night
The BWC mode and BWC sens will change according to the
Exposure mode setting. When the Exposure mode is selected as
“Shutter” or “Exposure”, the BWC mode is displayed as “Manual”,
and then the BWC settings can be set in the “Manual” BWC mode
list.
Manual BWC mode: Select Color or B/W mode options. Color:
the video is in color; B/W: the video is in black-and-white.
Note:
In Auto Exposure modes, the exposure is automatic, but the
BWC switch can be controlled manually.
Special Functions:
Mirror mode: Off, H-mirror, V-mirror, HV-mirror.
Freeze: On, Off, Freeze Preset (Pst).
Sharpness: Auto, Manual. In Auto mode, the sharpness will auto
adjust as per the video; in Manual mode, the horizontal and
vertical sharpness can be adjust between 0~63.
Slow AE: Adjust the exposure time, from 1~48 options. The
higher the value, the longer the exposure time is, and vice versa.
FNR: Off, Manual, Auto 1, Auto 2. Auto 3. In Manual mode, FNR
level value is 0~15 levels options.
Max AGC: 0~48 options.
AGC comps: Set the AGC compensation, 1~15 adjustable.
Defog: Select Off, Weak, Medium, Strong, Auto. When the
function is turned on, the contrast can be adjusted, so as to increase
the clarity of the video.
Color level: when the Defog function is set as Weak, Medium,
Strong, or Auto, the color level can be set in 0~128.
Lum Mode: Off, Enhanced, Reduction or Auto Reduction options.
Enhanced level: 0~255 options when the Lum mode is set as
Enhanced.
Содержание Surveyor MKII Series XX282-40-01
Страница 24: ...V1 0 1511...
Страница 25: ...VICON INDUSTRIES INC For office locations visit the website www vicon security com...
