Vicon Surveyor MKII Series XX282-40-01, Руководство по конфигурации и эксплуатации

Страница: 12 / 25

9
SIP Server IP: the IP address of the SIP server;
Port: the port number of the SIP server;
Server ID: the ID of the SIP server;
Device ID: the device ID for registering the SIP server;
Alarm ID: registering ID for the alarm function of the device;
Register Interval: the re-register interval of the device, unit: second;
Heart Beat Interval: the interval of sending out the heart beat, unit:
second.
After the configuration is done, click the save button to register.
Position Information
Device name: the name of the device;
Position name: the name of the exact position;
Longitude: longitude of the installation position;
Latitude: latitude of the installation position.
Fluid Control
The bandwidth control in SIP can be turned On or Off from the
Fluid Control function. If you select On the maximum bandwidth
can be set.
3.3.9 MDA
Figure 3-18 MDA settings
When turned to On, in the MDA interface, users can set the IP
server IP and the Port No. as well as camera name, user name and
password.
3.3.10 DDNS Setting
Figure 3-19 DDNS Setting
The Dynamic Domain Name System (DDNS) can enable constant
synchronization of the host name and the dynamic IP address. Users
only need to input the dynamic domain name to connect to a network
camera instead of memorizing the dynamic IP address.
To employ this method, a PC with a static IP address needs to be
available and, additionally, a dynamic domain name server must be
running at the PC.
Operation: Select the Server enable option and then select the DDNS
type. Input the IP address of the DDNS server, configure Domain,
User name, Password and Update time. Then save the configurations.
Open IE, input the domain name and you can access the web search
page of the device.
3.3.11 UPnP Setting
Figure 3-20 UPnP Setting
A mapping relation between a private network and an external
network is built via UPnP protocol. Select “UPnP” tab to enter the
setup interface; the mapping list added will appear on the interface.
Click “
” to delete and “ ” to edit.
Click the “
” key to add a mapping.
Figure 3-21 Add a Mapping
3.3.12 IP Filter Setting
On the IP Filter interface you can configure Enable IP Filter settings
and add IP addresses that you can access.
Figure 3-23 IP Filter Setting
Click the icon and you can add an IP address on the pop-
up interface.
Figure 3-24 IP Add an IP