Vicon RV 1601, Руководство по эксплуатации

Страница: 51 / 108

Chapter 8
G0201WAD3EN 49
Opticut cutting unit and rotor system
8 OPTICUT CUTTING UNIT AND
ROTOR SYSTEM
The characteristical feature of both OPTICUT and Rotor
system is the dosed and forced intake of the crop. Both
systems have the same construction except the cutting
device that is not installed in the rotor system machines.
8.1 OPTICUT system
The rotating rotor (1) with helically fitted twin tines (2)
generate a continuous draw cut over the knives (3). The
OPTICUT system provides the possibility to cut the crop at
different settings.
The knives are controlled fully hydraulically. The number of
knives, and thus the cutting length can be chosen upon
desire. The knive attachment prevents the knives from being
blocked by foreign objects; every knife gives way upon
extraordinary load and then automatically revert in the
original working position.
DANGER:
- Stay clear of the OPTICUT system of a working baler!
- If the OPTICUT system blocks, stop the tractor engine,
remove the ignition key and wait until all parts of the
baler have come to stand still!
- Never try to push crop into or pull crop out of a running
baler: danger of life!
- Always wear safety gloves when working at the cutting
mechanism!
W
A9917A
1 2 3
1 2 3
W
A9917B