Vicon RV 1601, Руководство по эксплуатации

Страница: 60 / 108

Chapter 9
G0201WAD3EN 58
twine tie
9.6 Electronic settings for twine tie - IN-
FOBALE
The distance of twine end wraps is pre-set with the toggle
switch (2) on the machine control box (positions 1, 2 and
3). These programmes can be selected and set on the
control box, they work independent of the bale diameter.
9.6.1 Changing the wrapping programmes
1
Set toggle switch (2) to the desired position:
Position 1: twine end distance = 10.5 cm resp.
Position 2: twine end distance = 13.5 cm resp.
Position 3: twine end distance = 15.5 cm.
2
Set rotatable knob (3) to set the amount of twine as fol-
lows:
- Position minimum: 3 lateral wraps, 4 central wraps and
3 end wraps in between at either side
- Position middle: 3 lateral wraps, 6 central wraps and
3 end wraps in between at either side
- Position maximum: 3.5 lateral wraps, 8 central wraps
and 3.5 end wraps in between at either side
The amount of wraps is can be set fluent between minimum
and maximum position. The standard twine tie programmes
P1/P2/P3 can be selected on the machine box. Each
programme has its own wrapping pattern, which you select
using the PROG toggle switch (2) positions 1 through 3:
-
Position 1:
3 lateral wraps, 4 central wraps and 3 wraps in
between at either side (end wraps at 12 cm).
- Position 2:
3 lateral wraps, 6 central wraps and 3 wraps in
between at either side (end wraps at 15 cm).
- Position 3:
3.5 lateral wraps, 8 central wraps and 3.5 wraps in
between at either side (end wraps at 18 cm).
Attention:
The number of wraps does not depend upon the bale
diameter. At the start of wrapping the control system
automatically calculates the quantity taking into ac-
count the actual bale diameter.
Only the pto speed influences the real number of wraps: it
is based upon a pto speed of 540 rpm.
W
A9945
3 6
5
12
SOS
000000
PROG
W
A0213
1
5
6
2
3
4
W
A0214
min
max
max
1 2 3
min
(WA) (WD)
1
2
3
4