Vicon RV 1601, Руководство по эксплуатации

Страница: 41 / 108

Chapter 6
G0201WAD3EN 39
electronic control system AUTOFORM
6.6 Manual override of wrapping
In the odd case of electronic failure (AUTOFORM
malfunction) the manual override offers the possibility to
control the twine tie actuator (M1) and/or net wrap
actuator (M2) manually, this in order to enable the operator
to finish the field. You find the control unit at the lh side in the
baler. The toggle switch on the control unit has three
positions:
Procedure:
1
Switch main switch on control box to position 2
(override ON) .
2
Set the toggle switch on the control unit as required:
- up , for manual control of the net wrap actuator.
- down , for manual control of the twine tie actuator.
3
Use toggle switch (17) on control box to control the
actuator chosen.
6.7 AUTOFORM control box dealer
functions
Dealer functions are functions meant for use (reading and
adjustement) by a dealer.
How to proceed:
1
Switch main switch on control box to 1 (ON) or when
in a working display push button
.
2
Push buttons and at once.
- Pushing the button you go through the displays
without changing anything.
6.7.1 Machine type
1
Once push button .
2
Push button or to set type WD160 or WA185.
3
Confirm new setting by pushing button .
- WA and WD indicate the type, 160 and 185 the max.
bale diameter.
6.7.2 Stop position of final twine wrap
1
Twice push button .
2
Change the value by pushing buttons or .
3
Confirm new setting by pushing button .
- Standard setting is 1. A higher value means a larger
distance between the final wraps.
center: OFF
up: Net wrap manual control ON
down: Twine tie manual control ON
W
A9922
dD1
dD2
dD3