Viadrus VULCANUS, Руководство по эксплуатации и установке

Страница: 55 / 72

55
Fig. no. 24 Description of device QAA 88
Fig. no. 25 Connecting dimensions of device QAA 88
6.3.1 Parameters setting and displaying
Parameters setting
If you want to change parameters take following steps:
•
Press simultaneously the keys OK, ESC and – minus – blank display will appear.
•
Press 2x key – minus and n0 appears on the display.
•
Press 2x key + plus and n3 appears on the display.
•
Confirm with key OK.
•
P appears on the display and after approx. 2 sec. the digit 1 is displayed.
•
By the key OK the parameter value is displayed.
•
By the key + plus or – minus the displayed value can be changed.
•
By the key OK confirm the changed value.
•
By the key ESC leave the parameter without any change
•
Select the next parameter by the key + plus or – minus and repeat the whole procedure.
Attention!
After the completion of making changes in parameters always check whether QAA 88 device is
switched on (cursor is above the Auto symbol).
ESC
OK