monitoring/recording, it can also connect to other DVR embedded
Standalone System , it can also monitoring other PC based images to form a
full network. (Require using the same version remote software V5.0 or
above).
You will require selecting a computer as server, using the CD ROM we
provided to install the software. After installation is finished, three main
softwares will appear, which include,
ChateauRT4
software, Server software
and VG Player software.
10.1 Network
Setup:
Before you get on with the network setting and connection, you will require to
setup the network environment, otherwise it might cause the system not able
to connect to each other.
Setup Server (Listening Port: defaulted 40000)
1. Install Server software on a computer, this computer is better to have
a fixed IP address.
2. If the server is set on a real IP on internet (etc 211.172.12.34), If the
server’s IP is 211.172.12.34 and the communication port is 40000,
All the network setting for all
VGN embedded
DVR
or
Chateau
system address setting on the internet, the Server IP will need to be
211.172.12.34.
3. If the server is set on a virtual IP on internet (etc 192.168.1.11), If the
server’s IP is 192.168.1.11 and the communication port is 40000, All
the network setting for all
VGN embedded DVR
or
Chateau
system
address setting under the same LAN, the Server IP will need to be
192.168.1.11
4. If server is set on a virtual IP under LAN (i.e. 192.168.1.11), but also
require for Internet uses, then you will require to do
NAPT
(Network
Address Port Translation) in your router to correspondence. You can
then able to connect to the computer with the server through router
under LAN
42
