camera displayed will be according to the number of button pressed.
Under 16 channels model, to select the enlarge images for camera 9-16,
you will require to use the split window button (number 9), and switch to
the split window images for camera 9-16, When under setting mode, the
number button is for setting of number 1-8.
Number 9 Button
When this button is press under recording mode, depends on the
different model, camera display window will be 4 split windows
(VGN4C-), Eight Split windows (VGN8C-) and 16 split windows
(VGN16C-). When under setting, this button is for setting the number 9.
Number 0 Button
When this button is press under recording mode, the display images will
be: Auto Scan for a single image, or 4 split windows or 8 split windows in
different pages. Camera numbers depends on the pages.
Power Indicator
（
）
When power is on, this indicator will shown as green.
Recording Indicator
（
）
When system is under recording mode, this indicator will be shown as
red.
Playback Indicator
（
）
When system is under playback mode, this indicator will be shown as
yellow.
Record/ Switch to Recording Display Button:
1. When system not under recording status, press of this button will
activate recording function immediately.
2. When both recording and playback is functioning: Switching back to
the recording images. Detail information will be described later on.
Note: System’s defaulted is activating recording. You will require to
setup “Stop Recording” under system setup to stop recording.
Setting / List Button
1. Under system setting: Enter System setting, Save setting.
2. Under playback Operation: Enter Date list mode for playback
3. When activate PIP sub-window: Entering the adjustment of PIP
10
