as camera 1-8, a total of 8 image section (VGN8C-RT4).
Status Section:
Bottom right hand side is the status section, it display
the system time and hard disk status. The above left hand side picture is
displayed when hard disk is not installed. When hard disk is installed
then it will display the partition, free spaces and total capacity messages
as above right hand side pictures.
Note: Hard disk space is calculated as hexadecimal, so 1024 means
K, not decimal system. Please be aware the differences.
Each camera images is displayed according to the setting. Detail information
as below:
Image:
Without camera signal input, the image will be displayed as
“
VIDEO LOST
”. With video input, then image will be displayed.
Camera Name:
The camera name will be shown on the top left hand
side of the image for every camera.
Active
：
If
symbol is displayed on the image, this means that this
camera is selected (Active). If this camera is with audio recording, you
will be able to hear the sound when this camera selected.
Record:
When
symbol is displayed, this means that this camera is
under recording status.
Audio:
If
symbol is displayed, this means that this camera is under
audio recording status.
Alarm:
If
symbol is displayed, this means that this camera alarm
had been triggered. When alarm triggered, system will automatically
save it to alarm log for users to check.
4.1 Activate Record Manually
System will start operating according to the setting. If the auto record is set
as off under system setting, system will not automatically start recording.
This
record button will need to be pressed to activate recording. You
32
