19
ALARM SETUP : CAMERA1
1.VIDEO LOST CHECK ON
2.MOTION DETECT 9
3.ALARM SOUND OFF
4.ALARM INTERVAL 120
5.MASK1 00 00:00 00
6.MASK2 00 00:00 00
7.MASK3 00 00:00 00
8.MASK4 00 00:00 00
9.OUTPUT TRIGGER -- -- -- --
Video Lost Check:
Checking video lost. Defaulted is on (activate) so
when video lost, system will trigger alarm.
Motion Detect:
Enable or disable motion detection and setup the
detection sensitivity. Defaulted sensitivity is 9, its range is from 1-16 or
off to disable the motion detection. 1 is the less sensitivity and 16 is the
most sensitivity.
Alarm Sound:
This is to setup the alarm sound when alarm triggered.
Defaulted is off (disable), system’s built-in 4 different alarm sound, you
can use add, subtract or the number1-4 to setup different alarm sound
or off to disable alarm sound.
Alarm Interval:
This is used to setup the alarm interval, defaulted is
120seconds, setting range from 100-999seconds.
Mask 1-4: You can setup maximum of 4 detection areas for each
camera. Each images is seen as
22 x 15
（
NTSC
）
or 22 x 18
（
PAL
）
，
so you can set a maximum of 4 area in
（
00 00
）
~
（
22 15
）
(NTSC) or
（
00 00
）
~
（
22 18
）
(PAL).
（
00 00
）
is the top left hand
side and NTSC
（
22 15
）
/PAL
（
22 18
）
is the right bottom side. When
there is motion in the masked area, it will trigger alarm. When alarm
triggered, it will be save in the alarm log. User can playback the alarm
files from the alarm log.
Output Trigger:
When alarm triggered, it can be set to control the
external alarm device form the output terminals. There are a total of 4
