Live Audio:
When this is activated, and you had connected audio
input to the correspondence cameras, you are able to have live audio
monitoring when the sound is connect to a speaker.
ALARM RECORD:
When system not under recording mode, after
activated of this function, the system will start recording after alarm
triggered. Recording time is the time set between alarm intervals with
3-5seconds pre-alarm. Also input points can activate alarm records.
Recording time is the signal input time.
VGA-PIP:
PIP (Picture in Picture) functions us use to see both record
and playback images at once. When it is set at on (activate), press the
bottom, there will be a sub-window showing on the VGA
monitor. Then both recording and playback images can be see at the
same time. Press the bottom again then the sub-window will be
disappeared.
Note: PIP function can only support by VGA output connects to
VGA monitor. TV monitor does not support this function.
3.6 Network
Setup
NETWORK SETUP : SERVER SETUP
1.HOST NAME VGN8C-----
2.CONNECT SERVER ON
3.SERVER
192.168.16.127
------------
4.SERVER PORT 40000
5.DISCONNECT ALM -- -- -- --
Network Setup is to setup the network connection function. You can
setup the system’s network connection and also you can setup 4 sets for
remote user’s name, password, authorization and camera.
You will require setting the “Connect Server” to off before setup/alter
Network Setup and Remote User.
Server Setup:
When enter this setup, the above server setup pages will be shown.
21
Host Name:
Host name is used for recognition when connecting
