2.2 System Back Panel:
System’s back panel is mainly for signal connection. Detail information as
followed:
Power Supply
Mark 1: This is for the power supply input socket. You can directly
connect to AC 110V/60Hz or 220V/50Hz.
Ethernet RJ45-jack
Mark 2: This is for RJ45 Internet connection socket. This is for
10Mbps/100Mbps Ethernet
USB
Mark 3: This system has 2 USB sockets. This is for connecting to USB
devices for backup images or update firmware.
Power
Mark 4: Power on/off. To turn on/off the system power.
VGA Output
Mark 5: VGA Output to connect to VGA monitor.
Video Input BNC-jacks
In RT4 System, Mark 6: Video Input 1-4
(From left to right)
; Mark 10:
Video Input 5-8
(From top to bottom).
In HRT4 System, Mark 6: Video Input 1-4
(From left to right);
Mark 10
for 3 sets Video Input 5-16
(From top to bottom)
. Set order as red,
white black and yellow.
In SRT4 System, Mark 6 for 4 sets Video Input 1-16
(From right to left)
.
13
