Vertiv Liebert APM 300, Руководство пользователя

Страница: 5 / 92

Safety Precaution
Always observe the following safety symbols!
Used to alert the user to the risk of death or severe injury should the unit be used improperly.
Used to alert the user to the risk of injury or equipment damage should the unit be used improperly.
Used to advise the user to carefully read and observe this unit though it may not cause damage.
This manual contains important instructions that should be followed during installation and operation of
this Emerson APM 300 integrated UPS system (UPS for short).
Read this manual thoroughly before installing, servicing and using the UPS.
The UPS must be commissioned and serviced by trained engineers approved and qualified by the
manufacturer or its agent. Failure to do so could result in personnel safety risk, equipment malfunction
and invalidation of warranty.
The UPS has been designed for commercial and industrial use only, and is not for use in any life support
application.
Warning
This is a Class C3 UPS product for commercial and industrial application in the second environment. Installation
restrictions or additional measures may be needed to prevent distrubances.
Conformity and standards
The UPS complies with CE 2006/95/EC&93/68/EEC (low voltage safety) and 2004/108/EC, with Australia and New
Zealand EMC Framework (C-Tick), and with the following product standards for UPS:

IEC62040-1 general and safety requirements for UPS

IEC62040-2 EMC, class C3

IEC62040-3 performance requirements and test methods
Continued compliance requires installation in accordance with these instructions and the use of manufacturer
approved accessories only.
Multiple power sources
This UPS system receives power from more than one source . Disconnection of all AC sources and the DC source is
required before servicing.
This UPS has several circuits that are energized with high DC as well as AC voltages. Check for voltage with both AC
and DC voltmeters before working within the UPS.