Vertiv 02131111, Инструкция по установке и эксплуатации

Страница: 18 / 36

Vertiv™ NetSure™ IPE Series Rectifier Installation and User Manual
10
2 Installing the Rectifier
2.1 General
The rectifier can be pole mounted or secured to a suitable wall.
For mounting; use a corrosion inhibiting compound (CIC) inside the tapped mounting holes to keep water away, or use organically
plated stainless steel bolts. See
Figure 9 and Figure 14 .
2.2 Pole Installation Procedure
NOTE!
Torque all hardware to the values shown in the illustrations.
1. Unpack the rectifier and mounting accessories.
2. Install the mounting bracket (big) in the appropriate top position on the pole with the supplied pole mount band. Securely
tighten the pole mount band to the pole. The pole mount band accommodates poles from 6” to 12” in diameter. Refer to
Figure 8 .
3. Install mounting brackets to the rear panel of the rectifier with the supplied hardware. Refer to Figure 9 .
4. Secure the connect bend bracket to the rear of rectifier with the supplied M6 bolts (optional). Refer to Figure 10 .
5. Secure the top of the rectifier to the pole by securing the mounting bracket (small) to the mounting bracket (big) with the
supplied M8 bolts. Refer to
Figure 11 .
6. Secure the bottom of the rectifier to the pole by securing the mounting bracket (big) to the pole with the supplied pole
mount band. Refer to
Figure 12 .
Figure 8: Installing the Mounting Bracket to the Pole with the Pole Mount Band
Pole
Pole Mount Band
P/N 63126330
Mounting Bracket (Big)
P/N 63240BPY
Torque to 5.0 Nm (44.3 in-lbs).