Vertiv™ NetSure™ IPE Series Rectifier Installation and User Manual
13
2.3
Wall
Installation
Procedure
NOTE!
Torque all hardware to the values shown in the illustrations.
1.
Drill appropriately sized holes for the customer provided M8 wall anchors being used into the wall as shown in
Note that the rectifier can be mounted horizontal or vertical.
shows horizontal mounting. Install the M8 wall
anchors into the holes.
2.
Install mounting brackets to the rear panel of the rectifier. Refer to
3.
Secure the connect band bracket to the rectifier with the supplied M6 bolts (optional). Refer to
4.
Secure the rectifier to the wall using the wall anchors previously installed. Refer to
Figure 13:
Wall Mounting Hole Positions
Figure 14:
Installing the Mounting Brackets to the Rectifier
mm
(inch)
451
(17.8)
116
(3)
12
(0.5)
Dia.
Mounting Bracket (Big)
P/N 63240BPY
Mounting Bracket (Big)
P/N 63240BPY
M5 Bolts (6) P/N 26011018
For mounting; use a corrosion inhibiting
compound (CIC) inside the tapped mounting
holes to keep water away, or use organically
plated stainless steel bolts.
Torque to 2.02 to 2.69 Nm
(18 to 24 in-lbs).
