20306744
39
WDV Series Gas Fireplace
SAFETY FEATURES
LOW BATTERY DETECTION
When low battery condition occurs, the transmitter will
turn off the fireplace.
A) Battery voltage is checked every one
minute. When the battery voltage is low, the
LCD displays a low battery icon which will
exist in all modes.
B) The transmitter will not operate with low
battery voltage. Change the batteries
before the batteries become too weak for normal
operations.
POWER ON INITIALIZATION
After the power-on initialization, the transmitter sends
a signal to turn off the fireplace.
THERMAL SHUTDOWN
When the ambient temperature is more than 99°F, the
transmitter will turn off the fireplace.
A) The LCD will display “HI”.
B) The Transmitter will not function until
the room temperature has dropped
below 99 degree Fahrenheit.
LOW TEMPERATURE CONDITION
When the ambient temperature is less
than 40 degrees Fahrenheit, the LCD
will display “LO”, and NO SIGNAL will
be sent to turn on the appliance.
All functions still remain the same for
both Manual Mode and Thermostat
Mode
CHILD-PROOF PROTECTION
The child-proof icon will be shown when
the child-proof mode is activated by
pressing the ON button and the OFF
button at the same time for three seconds.
A) Enter childproof mode by pressing and holding both
the ON button and the OFF button simultaneously
for 3 seconds. The Childproof indicator will be
shown on the LCD.
B) Deactivate childproof mode by pressing and holding
the ON button and the OFF button simultaneously
for 3 seconds again. The Childproof indicator
disappears on the LCD.
C) The transmitter cannot be operated in childproof
mode.
SIGNATURE COMMAND SYSTEM OPERATION
AUX CONTROL (OPTIONAL)
The AUX control function is used to turn on or turn off
the auxiliary component connected to the AC module of
the Signature Command System. Press the AUX button
to turn on or turn off the auxiliary.
1. When the auxiliary is turned on, the icon
will become solid text and the “ON” icon will
appear below the “AUX” icon.
2. When the auxiliary is turned off, the icon will
become hollow text and the “ON” icon will
disappear.
NOTE:
Some fireplaces use the AUX function
to control options within the fireplace. Refer to
fireplace manual for operation.
SETTING UP BLANK SCREEN OR CONSTANT
DISPLAY IN IDLE
Figure 55
There is an option to set up how the LCD displays and
functions when the transmitter is in idle. There are two
choices:
1. A) Mode. When the transmitter is in idle, the icons in
the “touch area” (timer, thermostat, blower, light and
AUX) will disappear, as shown in the figure on the
left. When any of
the touch buttons
is pressed, those
icons will appear
and are ready to
operate (default).
2. B) Mode. The
t r a n s m i t t e r
always displays
all available icons
showing current
status of timer,
thermostat, blower, light and AUX as shown in the
figure on the right.
Press TIMER and THERMO buttons at the same time for
3 seconds to toggle between A) and B).
1. When the current setting is A), touch any place in the
touch area to bring up the icons then press TIMER
button and THERMO button at the same time for 3
seconds. The backlight will flash once to indicate that
the setting has changed to B).
2. When the current setting is B), pressing TIMER button
and THERMO button at the same time for 3 seconds
will switch to A) Mode. The touch area icons will
disappear.
FP2658
AUX
FP2612
low battery
FP2613
HI
FP2614
lo no child
FP2659
blank screen
Figure 55
