Vermes MDS 3000 Series, Руководство пользователя

Страница: 40 / 77

VTK ‐ VS ‐ BA ‐ 004e ‐ B | User Manual MDS 3200A
| Communication Interfaces
40
1. *ESR?
Description: This command shows the last 10 error codes created by the system,
starting with the latest event. If the response consists of ten times ‚0‘,
no error message is present.
Example:
Input: *ESR?
Result: List of the last 10 error messages
Return: 8 AUTORANGE ERROR
9 WATCHDOG TIMEOUT
0
0
0
0
0
0
0
0
2. *IDN?
Description: Device specific information, formatted as follows: manufacturer, model,
software version. Important for contact with our Technical Support.
Example:
Input: *IDN?
Result: VERMES, MDV3200A, 065.411.001
Return: VERMES, MDV3200A, 065.411.001
3. ADJUST:?
Description: This instruction is used to verify the success of the adjust. The result
consists in one of the following options:
Result: 0
Unknown State. The system is not able to interpret the question and
has to be switched OFF and ON again. The adjust must be repeated. This
event however is an exception.
Result: 1
The position of the nozzle unit is too low and must be raised on the fluid
box. An adjust is required (or must be repeated) .
Result: 2
The position of the nozzle insert relatively to the tappet is OK.
Result: 3
The nozzle unit on the fluid box must be screwed in downward direc ‐
tion, as the current position is too high. The adjust must be performed
(or repeated) .
Example:
Input: ADJUST:?
Result: The system informs about the current nozzle position.