Veolia ELGA MEDICA Pro 120, Руководство оператора

Страница: 32 / 36

MEDICA Pro 30/60/120 US Operator Manual ELGA
Page 30 MEDICA Pro 30/60/120 US MANU40594 Version 1 - 07/14
10. TECHNICAL SPECIFICATION
Feedwater
Source Potable tap water as detailed below.
Failure to comply with the minimum feedwater pretreatment recommendations
will affect the life and performance of key components within the
MEDICA , and
may invalidate the warranty.
Contaminant Measure Range Pretreatment
Calcium Ca ppm as CaCO
3
< 250 None
> 250 Softener or
use very low RO recovery
Total chlorine Cl ppm < 0.1 Protek L1
0.1 to 0.5 Protek L1
> 0.5 Protek L2
Silica SiO
2
ppm < 30 Protek L1 or L 2
> 30 20 inch cartridge depth filter*
Fouling Index FI <20 Protek L1 or L2
> 20 Backwashable media filter with a
minimum flow rate of 20l/min
Iron/manganese Fe/Mn ppm < 0.1 Protek L1 or L2
> 0.1 Back-washable pre- filter *
Organics TOC ppm C <3 Protek L1 or L2
> 3 Cylinder of carbon sized correctly
TEMPERATURE 4 - 40ºC (Recommended 15 - 25ºC)
FLOWRATE (maximum requirement @15
O
C) 9l/min
Drain requirements (gravity fall with air gap). 9l/min
Feedwater Pressure 6 bar (90 psi) maximum, 2 bar (30 psi) minimum.
* Installed in feed water supply.
Note: If feedwater purity is variable or values are
close to the top of one of the ranges, provide
pre-treatment for the higher range or seek
advice from Technical Support at ELGA
LabWater.
Dimensions
Height
820 mm (32.8”) 834 mm (33.4”) including castors
Width
794 mm (31.8”)
Depth
470 mm (18.8”)
B S R RE
Supply weight 44 kg 45 kg 52 kg 53 kg
Operational weight 101 kg 102 kg 109 kg 110 kg
Installation Floor/ bench
All manuals and user guides at all-guides.com