USE AND MAINTENANCE INSTRUCTIONS
IST-USO-0905028
Rev. 02 - 724
IDP203
Pag. 1 di 1
ZP3 FILTER
- 0601023
1. DESCRIPTION
ZP3 FILTER: It is composed of submicronic technical paper for HE filters.
2. TECHNICAL CHARACTERISTICS:
The ZP3 filter is recommended for protection against asbestos, dusts, fumes, aerosols and mists on condition that the oxygen percentage in the
atmosphere is not less than 19.5%.
99.97% - efficient against DOP (0.3 micrometers) and NA CL
When the HE filter is exhausted, an increase in pressure drop is registered on the filter. This is indicated by a progressive diminishing of the airflow inside
the helmet.
IN CASE OF DOUBT REGARDING THE EFFICIENCY OF THE FILTER, CONTACT KASCO
3. USE
Approved for respiratory protection against all particulates.
LIMITATIONS
Not for use in atmospheres immediately dangerous to life or health.
Do not wear for protection against vapors and gas
Do not use for fire fighting.
Do not use in atmospheres containing less than 19.5% oxygen
4. MAINTENANCE
The filter cannot be washed, blown out or restored.
When it is exhausted it must be disposed of.
5. CAUTION
Return to fresh, clean air immediately if:
Leakage is detected by smell, taste or, eye nose or throat irritation.
Inhaled air becomes too hot.
Any feeling of nausea, dizziness or ill being develops.
6. WARNING
KASCO DECLINES ANY LIABILITY EITHER DIRECT OR INDIRECT AND WILL RETAIN ANY TYPE OF WARRANTY FORFEITED ON THE INSTANT
SHOULD FILTERS AND SPARES OTHER THAN GENUINE KASCO FILTERS AND SPARE BE USED ON THEIR RESPIRATORS
KASCO SRL - Via Romania 12 - 42124 REGGIO EMILIA, ITALY - Tel. (0522) 308232 - 791032 - Fax (0522) 939803
Email :
www : kasco.eu
