63
Regulator
Propane regulators must always be installed with the regulator vent
facing downward. Regulators that are not in compartments have
been equipped with a protective cover and that cover is kept in
place to minimize vent blockage. Should vent be covered or
blocked the regulator CANNOT function or operate.
The regulator has the only moving components in the propane
system. It’s sole function is to reduce the high and varied pressure
from the propane containers to safe and consistent low operating
pressure. The small inlet is the first stage, which reduces the
container pressure to 10-13 pounds.
ALL GAS LINES HAVE BEEN CHECKED
WITH AIR PRESSURE. DEALERS ARE
REQUIRED TO RECHECK BEFORE DE-
LIVERY TO RETAIL CUSTOMERS.
All pilot lights, appliances and their igniters (see operating instructions) shall
be turn OFF before refueling of motor fuel tanks and/or propane containers.
FAILURE TO COMPLY COULD RESULT IN DEATH OR SERIOUS INJURY.
DANGER
!
PDF created with pdfFactory trial version
www.pdffactory.com