![background image](http://html1.mh-extra.com/html/vela/argus-2000-0370-2/argus-2000-0370-2_developers-manual_860581141.webp)
Appendix C — Filter Manager Error/Status Codes
133
Filter Manager Error/Status Codes
-492
Invalid mux rate supplied for main encode. Used
only for transport stream. Must be between
512000 and 50,000,000.
Check Mux Registry table
(see Appendix A).
-493
Invalid closed caption flag setting for main
encode. Must be off (0) or on (1).
Check Mux Registry table
(see Appendix A).
-494
Invalid closed caption format. Must be between
0 and 3. Meaningful only if closed caption flag is
set to 1.
Check Mux Registry table
(see Appendix A).
-495
Invalid SourceEnabled setting. Must be 0 to turn
OFF VTR Control, or 1 to turn it on. Can be turned
on only if VTR is marked as installed in Encoder
Config Registry.
Check VTR Registry table
(see Appendix A).
-496
Invalid Com-port setting for VTR component.
Must be 1 or 2 and must represent serial port
through which encoder communicates with VTR.
Check VTR Registry table
(see Appendix A).
-497
Invalid VTR adjustment for VTR component.
Must be between -20 frames and + 20 frames.
Check VTR Registry table
(see Appendix A).
-498
Invalid pre-roll for VTR. Must be >= 0 if VTR
control is enabled. Represents number of frames
earlier (-) or later (+) to start encode.
Check VTR Registry table
(see Appendix A).
-499
Invalid drop frame setting. Must be 0 or 1 if this
is NTSC content, or 0 if it is PAL. This value will
be overridden during the encode with the actual
drop-frame setting of the tape once the encode is
cued and/or started.
Check VTR Registry table
(see Appendix A).
-500
Invalid segment count. You must define at least
one and no more than 3 durations. If VTR-Control
is enabled, the duration is represented by a mark-
in and mark-out pair. If VTR-control is disabled,
the duration is represented by the Duration time
code. All of these are defined in the VTR Registry
table.
Check VTR Registry table
(see Appendix A).
-501
Invalid Mark-in time code (used only when VTR-
Control is turned on).
Check VTR Registry table
(see Appendix A).
Filter Manager Error/Status Codes (Continued)
Error Code
Meaning
Comments
Table C-1. Filter Manager Error/Status Codes (Continued)