Veit SG67 Скачать руководство пользователя

Страница: 39 / 87

Maintenance and cleaning

WARNING!

Prior to opening the device:

–

Set the on/off switch to “0”.

–

Set the switch for iron 1 and iron 2 to “0”.

–

Unplug the connector of the mains connection

cable.

–

Allow the steam generator to cool down.

–

Make sure that the steam generator is depres-

surised.

WARNING!
SteamClean

–

Avoid contact with eyes, skin, mouth and

clothes.

–

Wear personal protective clothing (safety gog-

gles, protective gloves).

–

Act

IMMEDIATELY

in the event of contact with

eyes, skin or mouth:
–

Thoroughly rinse with water or wash off

with water and soap.

–

Additional first aid measures: see instruc-

tions on the VEIT SteamClean bottle and

packaging.

–

Immediately contact a doctor.

–

The substance must not enter the sewage

system or waters.

–

It is absolutely necessary to follow the safety

instructions on the VEIT SteamClean bottle

and packaging.

–

Remove any spilled SteamClean as follows:
–

Immerse a cloth in soapy water and wipe

up SteamClean.

–

Thoroughly clean the cloth under running

water.

–

Then dispose of the cloth with residual

waste.

Maintenance and cleaning

30.09.2022

Steam generator VEIT SG67

Содержание SG67
























































































Результаты поиска

Содержание SG67

Отзывы:

Похожие инструкции для SG67

Бренды по названию

Популярные бренды

Veit SG67, Руководство по эксплуатации

Результаты поиска

Содержание SG67

Отзывы:

Похожие инструкции для SG67

Бренды по названию

Популярные бренды