Veit SG67 Скачать руководство пользователя

Страница: 23 / 87

Fig. 8: Warning label for SteamClean

Read

Chapter 8.3 ‘Cleaning program (cleaning version)’

on page 45

in the operating instructions!

Improper handling of SteamClean poses a risk of chemical

burns!

Wear safety goggles!

Wear protective gloves!

The warning label is located on the inside of the front door.

3.4.3 Instructions

Operating and maintenance personnel will be instructed on site by

personnel of VEIT GmbH unless otherwise agreed in the purchase

contract.

In case of questions or uncertainties, please contact VEIT GmbH.

WARNING!

The operating company undertakes to introduce

any new operating and maintenance personnel to

the operation and maintenance of the device as

well as to all safety instructions to the same extent

and with the same care.

We recommend that operating and maintenance personnel attend

appropriate training at VEIT. Please contact the VEIT service

department for further information on training opportunities.

WARNING!

The device may only be operated and serviced by

instructed personnel.

Warning label for SteamClean

Safety

Built-in safety devices > Instructions

30.09.2022

Steam generator VEIT SG67

Содержание SG67
























































































Результаты поиска

Содержание SG67

Отзывы:

Похожие инструкции для SG67

Бренды по названию

Популярные бренды

Veit SG67, Руководство по эксплуатации

Результаты поиска

Содержание SG67

Отзывы:

Похожие инструкции для SG67

Бренды по названию

Популярные бренды