Veit SG67 Скачать руководство пользователя

Страница: 15 / 87

CAUTION!

–

The steam generator must always be freely

accessible.

–

Do not cover the steam generator.

CAUTION!

–

Prior to commissioning, the steam generator

must be checked for visible damage - If dam-

ages are present, repairs/servicing must be

arranged for immediately => Do NOT start up

the steam generator!

–

Prior to starting work, check the steam hoses

for damages. Immediately replace used or

porous hoses.

CAUTION!

–

Only spare parts and accessories approved by

VEIT may be used!

CAUTION!

–

Unauthorised modifications to the product are

not permitted. The manufacturer cannot be

held liable for accidents/damages resulting

from unauthorised modifications!

CAUTION!

–

Blow-down must only be carried out by

instructed personnel observing the specified

safety instructions!

Chapter 8.2 ‘Blow-down’

on page 42

CAUTION!

–

Following blow-down, the ball valve must be

closed again and locked using the locking

strap!

CAUTION!

–

Protect the machine against frost!

Safety

Warning symbols and danger signs

30.09.2022

Steam generator VEIT SG67

Содержание SG67
























































































Результаты поиска

Содержание SG67

Отзывы:

Похожие инструкции для SG67

Бренды по названию

Популярные бренды

Veit SG67, Руководство по эксплуатации

Результаты поиска

Содержание SG67

Отзывы:

Похожие инструкции для SG67

Бренды по названию

Популярные бренды