Veit SG67 Скачать руководство пользователя

Страница: 24 / 87

Potential dangers / residual hazards

WARNING!

–

There is always a risk of burns caused by hot

steam and hot surfaces.

–

Keep your distance.

–

Do not touch the steam and condensate lines.

WARNING!

Protect the device against frost.

CAUTION!

–

Blow-down must only be carried out by

instructed personnel observing the specified

safety instructions!

WARNING!
SteamClean

–

Avoid contact with eyes, skin, mouth and

clothes.

–

Wear personal protective clothing (safety gog-

gles, protective gloves).

–

Act

IMMEDIATELY

in the event of contact with

eyes, skin or mouth:
–

Thoroughly rinse with water or wash off

with water and soap.

–

Additional first aid measures: see instruc-

tions on the VEIT SteamClean bottle and

packaging.

–

Immediately contact a doctor.

–

The substance must not enter the sewage

system or waters.

–

It is absolutely necessary to follow the safety

instructions on the VEIT SteamClean bottle

and packaging.

–

Remove any spilled SteamClean as follows:
–

Immerse a cloth in soapy water and wipe

up SteamClean.

–

Thoroughly clean the cloth under running

water.

–

Then dispose of the cloth with residual

waste.

Potential dangers / residual hazards

30.09.2022

Steam generator VEIT SG67

Содержание SG67
























































































Результаты поиска

Содержание SG67

Отзывы:

Похожие инструкции для SG67

Бренды по названию

Популярные бренды

Veit SG67, Руководство по эксплуатации

Результаты поиска

Содержание SG67

Отзывы:

Похожие инструкции для SG67

Бренды по названию

Популярные бренды