Vatech GREEN SMART, Руководство пользователя

Страница: 132 / 200

10. Acquiring 3D MODEL Scan Images
124 Green Smart User Manual
10.4 X-ray Exposure
Do not operate the PC during exposure. Doing so may cause the
system to malfunction.
1. Get out of the X-ray room and close the door.
2.
Press and hold down the
Exposure Switch
until image acquisition is completed.
The image appears on the screen.
During X-ray exposure, the status appears as follows.

The LED light of the Exposure Switch turns yellow.

The LED light on the top of the equipment turns yellow.

An alert sound comes out to indicate that X-ray emission is
currently underway.

On Console Software, the radiation mark turns yellow and “X-RAY”
changes to “X-RAY ON.”
3.
Release the Exposure Switch when “Image capturing is completed” message appears on
the screen.
4. Remove the Plaster Cast out of the equipment.