93
Vanmaster, Unit 5 Stone House Road, Martland Park, Wigan WN5 0LE
www.vanmaster.net | [email protected]
Remove the four exposed crosshead screws; pull forward,
then downwards on the lens cover to remove from bottom fixing lugs.
Take care not to disturb rubber gasket from the lamp lens.
Pull out bulb from holder and replace with one of same type taking care not
to touch bulb with fingers.
Check for operation.
Replace lens cover locating cover base on lower fixing lugs, taking care to
correctly locate rubber gasket. Screw back in the four crosshead screws. (Do
not over tighten).
Clip back on silver plastic cover over the two sides and top fixing lugs.
Working out Current Consumption
A useful calculation is Amps equals Watts divided by volts. Therefore if you
have a 2000 watt kettle and a 230 Volt supply, you must allow for 8.7 Amps
to be drawn when the kettle is in use.
The following table gives typical values for commonly used appliances. To
avoid tripping allow a generous margin. Take care not to exceed Caravan
circuit limits.
