100
Vanmaster, Unit 5 Stone House Road, Martland Park, Wigan WN5 0LE
www.vanmaster.net | [email protected]
To clear Log File:
ATC stores operating errors in a log file which over time will become full and
result in the solid RED appearing.
This needs to be erased and can be done easily by connecting the Caravan to
a 12V supply for a period of 12 hours.
The power required to carry out this function is minimal. Most occurrences
of these errors are due to power supply problems which could be due to low
voltage or an intermittent power supply from the tow bar.
Troubleshooting:
In the unlikely event that you receive a red flashing LED and disconnecting
and re-connecting the power does not alleviate the problem, check the push
rod position as detailed below.
Locate ATC on the axle and check the position of the push rod.
If no red line is visible, ATC is not active, and can be driven. However, we
recommend that you contact AL-KO at the earliest convenience.
If the red line is visible on the push rod, as shown below, the Caravan should
not be moved.
Removal of the Push Rod.