VALTIR QuadGuard M10, Руководство по эксплуатации продукта

Страница: 22 / 60

Valtir.com 21 Revision F August 2022
System Assembly
Warning:
It is the responsibility of the installer to ensure the assembly procedure
meets all appropriate OSHA and local standards.
1) Mark System Location
Locate the centerline of the system by measuring the proper offset from the fixed object.
Refer to the
Drawing Package supplied with the system. Place chalk line to mark the
centerline of the system. Mark a construction line parallel to the center line and offset 6.5”
[165 mm] to one side as shown in Figure 16. The edge of the Monorail will
be positioned on
this line .
Note:
The concrete foundation must comply with the Manufacturer’s Drawing Package supplied
with the system.
Warning:
Location of system with respect to the roadside obstacle is critical and
dependent on the type of Transition Panel used. Please refer to the Drawing
Package supplied with the system for details.
Figure 16
(Top view of concrete foundation)
CENTERLINE OF SYSTEM
CONSTRUCTION LINE
6.5” [165 mm]