VALTIR QuadGuard M10, Руководство по эксплуатации продукта

Страница: 21 / 60

Valtir.com 20 Revision F August 2022
How to Determine Left/Right
To determine left from right when ordering parts, stand in front of the system facing the roadside
obstacle. Your left is the system’s left and your right is the system’s right.
Counting the Number of Bays
One Bay consists of one Cartridge, one Diaphragm, and two Fender Panels. The Nose section is
not considered a Bay, though there is a Cartridge in the Nose of each system.
Note:
There will always be one more Cartridge in the system than the number of Bays in the
system. To determine number of Bays, count Fender Panels on one side (Figure 14).
Measuring the Width
The nominal width of the 24” parallel system is the width of the diaphragm (Figure 15).
The outside width of the system is approximately 6” [152 mm] wider than the nominal width.
Note:
The outside width of the system is not the same as the width of the Backup.
Figure 14
System Orientation
Figure 15
Width of Parallel system
RIGHT
FENDER PANELS
DIAPHRAGM
CARTRIDGE
LEFT
FRONT
BAY
BAY
BAY
BAY
BAY
BAY
NOSE
REAR