Page 34
3: Replace waste toner box
After printing, the ink powder on the photosensitive drum will be collected into the waste toner box. When
the waste toner box is near the end of its service life, the engine control panel will show the following
information.
Message
Measure
Ready for printing Replace the
waste toner box ASAP
The state waste toner box shall be replaced immediately. It can print about 2,100*1
pages.
Please replace the waste toner
box
The printer stops running and printing. Please replace the waste toner box according to
the following steps.
Important
•
Make sure the power is on when replacing the waste toner box.
When replacing the waste toner box, the ink may be spilled to the floor. So before replacing, please lay some paper on the
floor.
8-2-9
Slide the tab till it is fully clipped in. Remove the film
carefully.
8-2-10
Push the photosensitive drum into the shell till it is
completely pushed in.
8-2-11
Push the cover till it is clipped in.
8-2-12
Turn the unlocking control lever clockwise to lock the
cover. Close the front cover.
8-3-1
Confirm the printer is not in running and open the front cover.
8-3-2
Hold the left of the waste toner box with one hand and pull it out
slowly.
