Page 36
4: Replace fuser unit
When the fuser unit is near the end of its service life, the engine control panel will show the following
information.
Message
Measure
Ready for printing Replace fuser
unit ASAP
The fuser unit shall be replaced immediately. Current capacity can only print about
10,000*1 pages.
Ready for printing Replace fuser
unit
The fuser unit has reached the end of their service life. Please following the following
steps to replace the fuser unit. Then please refer to "reset counter" (page 43) to reset
the counter.
Note: If it indicates that the fuser unit has reached the end of their service life but can
still be used, then you can reset the counter directly.
*1: The amount of the printing pages of each consumable varies with actual printing request, printing file and time interval
of power on/off .
Turn off the power. When the printer is in power save mode, please press <save power> to exit this mode and then turn off
the power. Wait for 40 minutes for the fuser unit to cool down.
8-4-1
Open the side door and open the left upper cover while lifting the
unlocking handle A.
8-4-2
Unscrew the two sides of the fuser unit.
8-4-3
Hold the handles on both sides of the fuser unit and take it out of
the machine.
8-4-4
Hold the handles on both sides of the new fuser unit and put it in
the machine.
