Valloy Incorporation VP-320C, Руководство пользователя

Страница: 52 / 63

Page 52
5. Restoration method of transfer belt
In diagnosis mode: press <left+right> on the engine control panel and release them at the same time, and then press
<online> key.
1. It will show [preventive diag].
2. Press <right> to display [DC122 Sd History].
3. Press <down> button to select and show [DC135 HFSI Counter].
4. Press <right> key to show [ResetCurrentval].
5. Press <right> key to show [000-000], and then press <up> or <down> to input [954-820].
6. Press <OK> to show [current time taken]
7. Press <OK> to show [current time taken*]
8. Press <OK> to show [000000*] to complete restoration
Exit diagnosis mode: Press <left> key to exit to the main directory. Press <left+right> and release them at the
same time, and then press <online> key. Press <OK> to save the setting according to the wizard.
6: The method to input ATC value when replacing the developer unit
In diagnosis mode: press <up+right> on the engine control panel and release them at the same time, and then press
<online> key.
1. It will show [preventive diag].
2. Press <down> key to show [Max Set Up].
3. Press <right> key to show [DC924 TRC Adjust].
4. Press <down> key to show [DC950 ATC SETUP].
5. Press <right> to show
[Y, 45
，
1024
，
+007]. Press <down> to input other color value.
6. Press <OK> and then use <up> or <down> to input the value of the new developer unit into the
dialog box. For example, if you input Y30 and
it will show
[Y, 30
，
1024
，
+007]
.
7. Press <OK> to finish input.
8. Press <left> key to return to [DC950 ATC SETUP].
9. Press <up> key to show [DC949 ATC SETUP].
10. Press <right> to show the [setting switch] of
［
Y
］ ［
M
］ ［
C
］ ［
K
］
and select it to be
[ON/OFF].
Press <OK> and it will display [performing]
→
[measuing value determination] and [setting results].
Exit diagnosis mode: Press <left> key to exit to the main directory. Press <up+right> and release them at the
same time, and then press <online> key. Press <OK> to save the setting according to the wizard.
7. Restoration method for replaced developer unit or developer
In diagnosis mode: press <left+right> on the engine control panel and release them at the same time, and then
press <online> key.
1. It will show [preventive diag].
2. Press <right> to display [DC122 Sd History].
3. Press <down> button to select and show [DC135 HFSI Counter].
4. Press <right> key to show [ResetCurrentval].
5. Press <right> key to show [000-000], and then press <up> or <down> to input [954-830].
6. Press <OK> to show [current time taken]
7. Press <OK> to show [current time taken*]
8. Press <OK> to show [000000*] to complete restoration
Exit diagnosis mode: Press <left> key to exit to the main directory. Press <left+right> and release them at the
same time, and then press <online> key. Press <OK> to save the setting according to the wizard.