Feeding roll diameter
Set the diameter of feeding paper roll core. This function is used to
prevent the machine from running without paper. According to the outer
diameter of common inner roll core, the default value is 95
Configuration
Maintenance
Pretreatment
Tracking sensor
Language selection
Feeding tension
Rewinding tension
Feeding roll diameter
3
Ready
Each function of the machine is normal
Status: Ready (engine is turned off)
Printing
The machine is in normal printing
Status: Printing
Initialization
Initialize at start or recover from an error
Status Initialization
Pause
Printing is paused
Status: Pause
No paper
There is no paper on the feeding shaft
Status: No paper
Rewinding limit
reached
The rewinding shaft is full
Status:
Rewinding limit reached
Feeding paper
unloading
The status display after clicking feeding paper unloading
Status:
Feeding paper unloading
Rewinding roll
unloading
The status display after clicking rewinding roll unloading
Status:
Rewinding roll unloading
The feeding air button
is not pressed
The air shaft mechanical button at the feeding end is not pressed
Status:
The feeding air button is not pressed
The feeding tension
button is not pressed
The tension mechanical button at the feeding end is not pressed
Status:
The feeding tension button is not pressed
The rewinding air
The air shaft mechanical button at the rewinding end is not pressed
