Vaisala CL31, Руководство пользователя

Страница: 41 / 127

Chapter 4 ________________________________________________________________ Operation
VAISALA _______________________________________________________________________ 41
Command Description
set data_port parity 7O1 Data serial port settings.
set data_port parity 8N1 Data serial port settings.
set defaults Restores the following default settings:
Operation mode: normal
Measurement mode: standard
Data acquisition autoadjustments: on
Blower control: auto
Inheater control: auto
Diagnostics intervals: 2 min
Power-save mode: disabled
Power-save sleep interval: 60 s
Message angle correction: on
Message transmission: periodic
Message transmission delay: 100 ms
Message height-offset: 0
Message interval: 2 s
Manual message: disabled
Message port: data
Message profile scale: 1.0
Message profile noise-h2: off
Message type: msg2_20x385
Message units: feet
Message VV limit ceiling: 6562 ft (2000 m)
Message VV limit sky-condition percentage: 50 %
Port timeout: 2 min
Unit ID: 0
set diag interval angle Sets diagnostic-data logging interval (min). 0 disables.
set diag interval battery Sets diagnostic-data logging interval (min). 0 disables.
set diag interval contam Sets diagnostic-data logging interval (min). 0 disables.
set diag interval int_temp Sets diagnostic-data logging interval (min). 0 disables.
set diag interval l_power Sets diagnostic-data logging interval (min). 0 disables.
set diag interval l_temp Sets diagnostic-data logging interval (min). 0 disables.
set diag interval clear Clears all diagnostic-data history.
set maint_port baud 115.2 k Maintenance serial port speed.
set maint_port baud 57.6 k Maintenance serial port speed.
set maint_port baud 38.4 k Maintenance serial port speed.
set maint_port baud 28.8 k Maintenance serial port speed.
set maint_port baud 19.2 k Maintenance serial port speed.
set maint_port baud 14.4 k Maintenance serial port speed.
set maint_port baud 9600 Maintenance serial port speed.
set maint_port baud 7200 Maintenance serial port speed.
set maint_port baud 4800 Maintenance serial port speed.
set maint_port baud 3600 Maintenance serial port speed.
set maint_port baud 2400 Maintenance serial port speed.
set maint_port baud 1800 Maintenance serial port speed.
set maint_port baud 1200 Maintenance serial port speed.
set maint_port baud 900 Maintenance serial port speed.
set maint_port baud 600 Maintenance serial port speed.
set maint_port baud 300 Maintenance serial port speed.
set maint_port parity 7E1 Maintenance serial port settings.
set maint_port parity 7O1 Maintenance serial port settings.
set maint_port parity 8N1 Maintenance serial port settings.
set message transmission delay Sets request-based delivery response delay (ms).