Vacon OPTE9, Руководство по установке

Страница: 174 / 253

9
vacon • 174 EtherNet/IP
Local contacts: https://www.danfoss.com/en/contact-us/contacts-list/
9.2.2.2.2. S
ERVICES
Instance Service “Get_Attribute_Single”
The format of the message is as follows.
Instance Service “Set_Attribute_Single”
The format of the message is as follows:
9.2.2.2.3. R
EJECTION OF
S
ET
_A
TTRIBUTE
_S
INGLE REQUEST
If an I/O connection has been established with a master through the Forward_Open request and a
successful response, any request to set the selected assembly through the Assembly Instance
Selector object is rejected. These attributes may only be changed when no I/O connection is
established, i.e. before the Forward_Open request.
9.2.2.3 Motor Control Mode Object, Class 0xA1
The Motor Control Mode Object is a vendor-specific object which more clearly indicates to the user
which motor control mode is used, and allows the user to configure this mode.
Table 143.
Field Data
Service Code
0E
h
Class Code
BE
h
Instance Number
01
h
Attribute ID
03
h
or 04
h
Table 144.
Field Data
Service Code
10
h
Class Code
BE
h
Instance Number
01
h
Attribute ID
03
h
or 04
h
Attribute Data (Assembly number)
Table 145. Motor Control Mode Object
Class name Motor Control Mode Object
Class identifier
161
d
/ A1
h
Class
Attributes
Id Access rule Name Datatype Description
- - - - -
Class Ser-
vices
Id Name Description
- - -
Instance
Attributes
Id Access rule Name Datatype Description
1 Get/Set ControlMode USINT Motor control mode
2 Get/Set FeedbackMode USINT Motor feedback mode