ELECTRICAL CABLING AND CONNECTIONS
vacon • 85
24-hour s358 (0)40 837 1150 • Email: [email protected]
6
4.
Earthing of keypad cable: Earth the keypad cable in the mounting box frame by fixing the branch cable
with a screw underneath the control unit. See figures 3 and 4.
5.
Mount the control unit mounting box in the front-left corner of the enclosure using two screws as
shown in Figure 5. Note: Do not install the mounting box floating (with e.g. plastic screws).
6.
Connect the optical cables (or the flat cable) to the power unit. See chapter 6.3.2 and figures 6 and 7.
7.
Connect the female end of the keypad cable to keypad on the enclosure door, figure 8. Use a cable
channel for the cable run, figure 9.
Figure 1.
Figure 2.
Figure 3.
Figure 4.
Figure 5.
Figure 6.
Figure 7.
Figure 8.
Figure 9.
