Vacon 500X, Руководство пользователя

Страница: 87 / 124

24-hour s358 (0)40 837 1150 • Email: vacon@vacon.com
vacon 500x parameters vacon
z
86
7
744 Thres 2 High Default: 100.00%
Range: -300.00% to 300.00%
Level 2
This parameter sets the High Thres level for Threshold 2. For detailed information about setting up
Threshold parameters, see
“Thresholds” on page 52 .
745 Thres 2 Low Default: 0.00%
Range: -300.00% to 300.00%
Level 2
This parameter sets the Low Thres level for Threshold 2. For detailed information about setting up
Threshold parameters, see
“Thresholds” on page 52 .
746 Timer 1 Type Default: 0 (On Delay)
Range: n/a
Level 2
This parameter defines the configuration of Timer #1 that you want the drive to emulate.
Parameter Value Description
0 On Delay
1 Off Delay
2 On/Off Delay
For detailed information about setting up Timer parameters, see “Timers” on page 51 .
747 Timer 1 Signal Default: DI-REV
Range: n/a
Level 2
This parameter selects the function that the timer is counting; it includes any function listed in the digital
input list.
See Parameter 705, Relay 1 Select, on page 83 for the list of options. For detailed information about setting
up Timer parameters, see
“Timers” on page 51 .
748 Timer 1 Time
Default: 1.0 sec
Range: 0.0-320.0 sec
Level 2
This parameter specifies the duration of time in seconds for the timer to count. For detailed information
about setting up Timer parameters, see
“Timers” on page 51 .
749 Timer 2 Type Default: 0
Range: n/a
Level 2
This parameter selects the kind of timer to be used, as shown in the following options:
Parameter Value Description
0 On Delay
1 Off Delay
2 On/Off Delay
For detailed information about setting up Timer parameters, see “Timers” on page 51 .
750 Timer 2 Signal Default: DI-R/J
Range: n/a
Level 2
This parameter selects the function that the timer is counting; it includes any function listed in the digital
input list.
See Parameter 705, Relay 1 Select, on page 83 for the list of options. For detailed information about setting
up Timer parameters, see
“Timers” on page 51 .
751 Timer 2 Time Default: 1.0 sec
Range: 0.0-320.0 sec
Level 2
This parameter specifies the duration of time in seconds for the timer to count. For detailed information
about setting up Timer parameters, see
“Timers” on page 51 .
794 Drive Name
Default: Drive serial
number
Range: n/a
Level 2
This parameter is an alphanumeric name associated with the drive. Note that files stored in a flash memory
device (using parameter 799) will have a filename associated with parameter 794 (Drive Name). The
complete drive serial number is composed of the data found in parameters 005 and 006, and is also found
on the drive nameplate.