Vacon 500X, Руководство пользователя

Страница: 92 / 124

Tel. +358 (0)201 2121 • Fax +358 (0)201 212205
91
z
vacon vacon 500x parameters
7
859 PID Deriv Gain Default: 0.00%
Range: 0-200
Level 2
The PID Derivative Gain parameter configures the derivative gain that is applied to the PID control.
Note: Value must be greater than 0 for this to be active.
860 PID Sleep Cfg Default: 0
Range: n/a
Level 2
This parameter configures the conditions under which the Vacon 500x can turn off (sleep) once the external
process
loop has been completed. Refer to parameter 861 (PID Sleep Lvl ) for the sleep threshold.
The following data values may be assigned to this parameter:
Parameter Value Description
0 Disabled
1 PID Fbk <
2 PID Fbk >
3 PID Ref <
4 PID Ref >
5 PID Out >
6 PID Out <
861 PID Sleep Lvl Default: 0.00%
Range: 0.00-100.00%
Level 2
This parameter sets the sleep level for the PID output.
862 PID Wake-up Lvl Default: 100.00%
Range: 0.00-100.00%
Level 2
This parameter sets the wake-up level for the PID output.
863 Sleep Delay Time
864 Wake-up Delay
Default: 0.0 sec
Range: 0.0 - 300.0 sec
Level 2
These parameters set the sleep and wake-up delay times for the PID output.
865 PID Feedback Default: Read-only
Range: n/a
Level 2
This is a view of the processed feedback signal after scaling (via span and offset).
866 PID Reference Default: Read-only
Range: n/a
Level 2
This parameter sets the reference point for the PID output.
867 PID User Units Default: 0
Range: n/a
Level 2
This parameter is for rescaling parameters 855, 856, 862, and 865 in user units relative to the process
rather than in percentage of full scale.
The following data values may be assigned to this parameter:
Parameter Value Description
0 No
1 Yes