manualshive.com logo in svg

Vacon 500X, Руководство пользователя

Инструкция по эксплуатации Joovy 500X - ваш надежный гид, обеспечивающий безопасное и комфортное использование продукта. Вы можете бесплатно скачать руководство по эксплуатации на manualshive.com. Получите доступ к рекомендациям по настройке и уходу за продуктом, чтобы он служил вам долгие годы.

Поделиться
Скачать
background image

Tel. +358 (0)201 2121 • Fax +358 (0)201 212205

117 

z

 vacon

vacon 500x ultraflex options

9

9.    VACON 500X ULTRAFLEX OPTIONS

PDA-trAC

®

 Plus For Pocket PC

The wireless optical interface on the Vacon 500x allows data transfer for Vacon 500x AC Drive settings,
using the PDA-trAC Plus to upload, download, edit, and save drive parameters easily and conveniently.
This software can be downloaded from VACON Plc web site at 

www.vacon.com

, or contact your VACON Plc

sales representative.

WIN-trAC

®

 and WIN-trAC PRO

®

 Drive Supervisor

This Windows

®

-based software program provides a simple and unique way to configure, monitor,

diagnose, control, and manage drive applications. WIN-trAC, for single-drive, point-to-point applications,
is provided free with the SIOC03 adapter for drives. WIN-trAC PRO, configured for multi-drive
applications, must be registered for use.

Options for Serial Communications and 115 Vac Interface

Part Numbers: X5DNET01, X5EIP01, X5MBTCP01, X5OPT01

The first three options allow the Vacon 500x to communicate on powerful serial communication networks
like DeviceNet, Ethernet IP, and Modbus TCP/IP. The fourth option allows you to connect a shaft-mounted
optical encoder to the Vacon 500x for improved performance.  All include four channels of 115 Vac control
options.

Remote Keypad for Vacon 500x (when used as a panel-mounted drive)

Part Number: X5RKPM

This Remote Keypad kit can be used when a Size 1 or 2  Vacon 500x model is mounted inside a host
enclosure, and when programming and operation need to be done on the front of the enclosure. The kit
comes with a keypad and adapter assembly that replaces the standard keypad on the drive. The original
keypad assembly is removed and discarded, or can be kept as a spare for other Vacon 500x models not
using the X5RKPM option. The option includes a standard 12-foot ribbon cable. When installed properly,
the remote keypad meets NEMA 4x/IP66 standards and the drive rating will be IP20.

Remote Keypad for Vacon 500x (when used as a wall-mounted drive)

Part Number: X5RKWM

This Remote Keypad kit can be used when a Size 1 or 2  Vacon 500x model is mounted in a stand-alone
configuration, and when programming and operation need to be done in another location. The kit comes
with a keypad and adapter assembly that replaces the standard keypad on the drive. The remote keypad
can be mounted up to 100 feet from the drive, and requires a 15-conductor shielded cable to be supplied
by the user. When installed properly, both the remote keypad and drive meet NEMA 4x/IP66 standards.

Remote Keypad Mounting Kit for Vacon 500x (Sizes 3 through 5)

Part Number: X5RKWM

This Remote Keypad kit can be used with a Size 3, 4, or 5  Vacon 500x model to allow the keypad to be
mounted in another location. The kit comes with an adapter assembly to allow the existing keypad to be
remotely mounted. The remote keypad can be mounted up to 100 feet from the drive, and requires a 15-
conductor shielded cable to be supplied by the user. When installed properly, both the remote keypad and
drive will meet the unit’s core enclosure standards, either NEMA 4x/IP66, or NEMA 12/IP55.

Содержание 500X





























































































































Отзывы:

Нет отзывов

Похожие инструкции для 500X

Barco Argus Information preview
Argus
Бренд: Barco Страницы: 6
Danfoss FP735Si Installation Manual preview
FP735Si
Бренд: Danfoss Страницы: 20
Danfoss CP715 Si Installation & User'S Instructions preview
CP715 Si
Бренд: Danfoss Страницы: 36
Jedia JMA-5104 Operating Instructions Manual preview
JMA-5104
Бренд: Jedia Страницы: 12
JED Micro T470 User And Installation Manual preview
T470
Бренд: JED Micro Страницы: 10
JCM Technologies SESAME Rapid Installation Manual preview
SESAME
Бренд: JCM Technologies Страницы: 2
Eaton S701 Instruction Leaflet preview
S701
Бренд: Eaton Страницы: 8
York MILLENNIUM Manual preview
MILLENNIUM
Бренд: York Страницы: 20
RADEMACHER Troll Comfort Mounting And Operating Instruction preview
Troll Comfort
Бренд: RADEMACHER Страницы: 68
A.R.I. K-060VB M1 Installation Operation & Maintenance preview
K-060VB M1
Бренд: A.R.I. Страницы: 14
Industrial Controls MC-2120 Operating And Maintenance Manual preview
MC-2120
Бренд: Industrial Controls Страницы: 17
SolarEdge PV530-R72LGML Installation Manual preview
PV530-R72LGML
Бренд: SolarEdge Страницы: 20
Valence Tech iBT-07 Manual preview
iBT-07
Бренд: Valence Tech Страницы: 12
Dungs 273061 Instructions Manual preview
273061
Бренд: Dungs Страницы: 56
Emec PH CONTROLLER Operating Manual preview
PH CONTROLLER
Бренд: Emec Страницы: 8
M-system R7HL-DC16B-R Instruction Manual preview
R7HL-DC16B-R
Бренд: M-system Страницы: 5
Satel INT-GSM Quick Installation Manual preview
INT-GSM
Бренд: Satel Страницы: 7
Omega Engineering Series RHCN-7000 Install And Operation Instructions preview
Series RHCN-7000
Бренд: Omega Engineering Страницы: 2

Бренды по названию

Популярные бренды

Загрузить еще бренды