Vacon 500X, Руководство пользователя

Страница: 55 / 124

24-hour s358 (0)40 837 1150 • Email: vacon@vacon.com
using macro mode and getting a quick start vacon
z
54
6
This parameter configures sequencer parameters are visible and the time base of the sequencer. The time base
may change depending on the timing loops used.
The following data values may be assigned to this parameter:
Macro Value Description
Disabled Sequencer disabled and parameters hidden.
1sec Base Sequencer enabled and 1 second time base.
.1sec Base Sequencer enabled and 0.1 second time base.
.01sec Base Sequencer enabled and 0.01 second time base.
492 SIO Visible Default: No
Range: n/a
Macro
This parameter configures whether SIO parameters are visible.
The following data values may be assigned to this parameter:
Macro Value Description
No SIO parameters hidden.
Yes SIO parameters visible.
509 Rated Mtr Volt
Default: Model
dependent
Range: 100 V - 690 V
Level 2, Macro
The Rated Motor Voltage parameter configures the rated motor voltage, and allows a user to enter the rated
voltage from the motor nameplate to provide optimal control and protection. This is usually the amount of
voltage delivered to the motor terminals at the setting of
503 (V/Hz Knee Freq ).
510 Rated Mtr FLA Default: ND Rating
Range: 50% of ND rating - 200% of ND rating
Level 2, Macro
The Rated Motor FLA parameter allows a user to enter the rated FLA from the motor nameplate to provide
optimal control and protection. This parameter should be configured to the value on the nameplate of the
motor, as that value is used in calculating the percentage of current at which the drive is operating.
For information on motor timed overload operation, and how Parameter 510 works with it, see page 76.
511 Rated Mtr RPM Default: 1750 rpm
Range: 0-24000 rpm
Level 2, Macro
This parameter replaces the slip compensation parameter setting of the drive so the user does not need to
calculate it.
514 Motor RS Default: 1.00 Ohm
Range: 0.00-655.35 Ohms
Level 2
This parameter allows direct entry of the Stator Resistance (Rs) of the motor for better vector performance.
The motor manufacturer can provide this information. See “Measuring Stator Resistance (RS Measurement)”
on page 46.
515 Power Factor Default: 0.80
Range: 0.50 - 1.00
Level 2
This parameter allows direct entry of the motor’s power factor for better vector performance. The motor
manufacturer can provide this information.
794 Drive Name Default: 0
Range: n/a
Level 2
This parameter is an alphanumeric name associated with the drive. Note that files stored in a flash memory
device (using parameter 799) will have a filename associated with parameter 794 (Drive Name).
801 Program Number Default: 0
Range: 0 to 9999
Level 2, Macro
This parameter (Special Program Number) provides a method of enabling hidden functions in the drive and
storing parameters to the customer set. There are numerous options for this parameter, more fully described
in Chapter 7, Vacon 500x Parameters. Please refer to the detailed description of parameter 801 options in
Chapter 7, on page 87.