Vacon 100 flow, Руководство по установке

Страница: 22 / 156

3.5.6 FRAME MR9
Table 10: The content of the accessories bag
Item Quantity Description
M4x16 screw 3 Screws for the grounding clamps for control
cable
Grounding clamp for control cable 3 Control cable grounding
Grounding clamp for cable shield KP40 5 Clamping the power cables
Cable insulator 10 To prevent contact between cables
Cable grommet, hole diameter 25.3 mm 4 Sealing for the cables
IP00: Touch protection shield 1 To prevent contact with live parts
IP00: M4x8 screw 2 To attach the touch protection shield
3.6 "PRODUCT MODIFIED" LABEL
In the accessories bag, there is also a "product modified" label. The function of the label is to
tell the service personnel about the changes that are made in the AC drive. Attach the label
on the side of the AC drive to know where to find it. If you make changes in the AC drive, write
the change on the label.
Product modified
Date:
Date:
Date:
3.7 DISPOSAL
When the drive is at the end of its operation life, do not discard it as a part of municipal
waste. You can recycle the primary components of the drive. You must disassemble
some components before you can remove the different materials. Recycle the electrical
and electronic components as waste.
To make sure that the waste is recycled correctly, send the waste to a recycling centre.
You can also send the waste back to the manufacturer.
Obey the local and other applicable regulations.
VACON · 22 RECEIVING THE DELIVERY
3
TEL. +358 (0)201 2121 · FAX +358 (0)201 212 205