Vacon 100 flow, Руководство по установке

Страница: 101 / 156

4 If the drive is the last device on the fieldbus line,
set the bus termination.
a
)
Find the DIP switches on the left side of the
control unit of the drive.
b
)
Set the DIP switch of the RS485 bus
termination to the ON position.
c
)
Biasing is built in the bus termination resistor.
The termination resistance is 220 Ω.
5 In IP21, unless you have cut the openings for other
cables, cut an opening on the cover of the drive for
the RS485 cable.
CONTROL UNIT VACON · 101
24-HOUR S358 (0)201 212 575 · EMAIL: VACON@VACON.COM
6